The Ghost Immobiliser
Immobilisers can be a powerful weapon in the fight against car theft. They prevent vehicles from beginning without a key fob, and are effective in stopping hotwiring as well as traditional methods of vehicle theft. Newer methods such as key cloning and relay theft are becoming more common.
Created to counter these current trends The ghost immobiliser works to make your car completely unnoticeable. It is quiet and discreet and does not use key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle to prevent key cloning or theft. It is a TASSA approved product and has been recognized by insurance companies. It operates quietly and is virtually unnoticeable to thieves. It makes use of buttons on your steering wheel as well as the center console to generate a unique pin-code sequence that you have to enter before you can begin the car. You can create up to 20 different sequences to increase security. The system is simple to install and doesn't require additional hardware.
To ensure the highest quality outcomes it is recommended you choose a reputable CAN-immobiliser installer who specializes in your specific vehicle. Ideally, they will have a workshop located in your area that allows you to go and get your installation completed. They will also have a variety tools and equipment to aid you during the installation process. They will have basic hand tools, multimeters, insulation tape and heat shrink tubing for protecting connections. A user manual will provide you with instructions for the wiring in your vehicle.
Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. Double-checking the CAN L and H wires is crucial, as incorrect identification can lead to improper integration of the system. It is recommended to mark the wires using small bits of tape or label them with labels. Use a multimeter to confirm that the power source is providing the same 12V.
Advanced thieves can use various strategies to get around Ghost Immobilisers. This includes blocking or spoofing. These methods work by amplifying the signal transmitted from your key fob to the electronic control unit of your vehicle. However, with advanced anti-jamming technology and vigilant monitoring you can shield your vehicle from these sophisticated attacks.
Security Increased
Ghost immobilisers are an extra layer to protect your vehicle from theft. It uses an PIN code security system that can be entered using existing buttons on your steering wheel or dashboard making it difficult for thieves to gain access to the device and steal your vehicle. The device is designed to be hidden inside your vehicle. It doesn't have any LEDs, or other signals to alert potential burglars to its presence. It communicates directly with the ECU of your car through the data bus. This means it is not vulnerable to hacking or relay attacks.
The system is an excellent investment for those who own prestige cars, since they are at a higher risk of theft because of their value and the popularity. Its enhanced security features guard against key duplicates, ECU swapping, and other threats to your car's security. Ghost immobilisers can be paired with apps, so you can arm and dearm quickly. They also come with an option for service/valet that allows you to temporarily disable them while your vehicle is being serviced or repaired.
Another benefit of ghost immobilisers is that it does not require any cutting of wire. This is an excellent feature, especially if the vehicle is more recent and doesn't include an immobiliser. Some systems can also integrate with GPS tracking devices, adding additional security to your vehicle. The use of a GPS tracker can help you reduce your insurance premiums. If you decide to purchase ghost immobilisers ensure that it is TASSA verified and that a professional installer will install it for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to work with all major makes and models of vehicles, safeguarding your prized possessions from theft. It uses buttons in your steering wheel, centre console or door panels to generate a unique pin code, which must be entered before you can drive your car. what is ghost immobiliser is tamper-proof and undetectable, and is backed by three-year guarantee. It is also fully certified by insurance companies and insurance companies, which means it can help to lower your insurance premiums.
Unlike standard immobilisers, which make use of your key fob to control the ignition of your car however, the Ghost system works by connecting directly with the engine controller unit using the CAN data bus. This means it's tamper proof, virtually impossible to remove or disable and cannot be stolen by organised car thief gangs. Additionally it is possible to use Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be connected with a secure iPhone application that allows remote monitoring and management.
You can create an PIN code that is easy to remember, yet mathematically difficult for thieves to guess. The PIN can be customized and changed at any time so that you can keep your car secure even if it's parked on the streets or in a public parking lot. You can also set a service or valet mode in case you require someone other than you to drive your car for a brief period for instance, when it's in the garage for servicing. This is a great way to prevent your vehicle from being taken by a shady mechanic. You can opt for a Ghost Call alert to give you additional peace of mind. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser is a highly efficient security device, protecting your vehicle against typical methods of theft such as key cloning and relay attacks. It works by connecting with the car's data network CAN and blocking communication with the engine ECU. This makes it hard for thieves to hack or clone your vehicle.
Once installed, you'll have to enter a PIN up to 20 digits using the buttons on the dashboard and steering wheel to begin the car. The system is completely concealed and therefore unnoticeable by thieves. It does not emit radio frequency signals. It can be set up using a PIN code that can be changed by the user, adding to its security. The system is designed to stop cutting the circuit, making it nearly impossible to hack.
car ghost immobiliser let you connect directly to the immobiliser through an app on your phone and disable it instantly if you forget your PIN. Some even have an option for service or valet that allows you to start your vehicle temporarily, like when you need to drop it off for servicing or valet parking.
The Ghost Immobiliser is also indetectable to thieves because it does not transmit any radio signals, which is a significant benefit over other aftermarket car security systems. Additionally, it is easy to use and does not require any complicated wiring. You can also use it together with a dash cam for additional security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can be wired to guarantee maximum performance and longevity.
Installation
If you're looking to secure your vehicle from thieves it is important to select the correct immobiliser ghost. This device can prevent car thefts by preventing the communication between key fobs as well as the engine controller unit. This device blocks thieves from stealing the signal to start your vehicle. It also can detect any time it has been tampered with and notify the owner of the vehicle.
The device is simple to install and works with the existing systems in your vehicle. It doesn't require any modifications to the wiring of the vehicle and can be placed in a hidden place such as under the dashboard. Follow the directions in the manual to ensure that the device is installed correctly. After installation, it is important to test the system. This will ensure the ghost of the immobiliser works as it should.
You can buy an Autowatch Ghost 2 immobiliser and have it installed by a certified installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to take it off or disable the system. Installation generally takes between 2 and 3 hours.
During the process of installation it is recommended that you review the wiring diagram of the model of your vehicle. This will help you identify the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. Check all connections to make sure they're secure and insulated.
After the installation is completed and you are able to use the Ghost Immobiliser in normal operation. It will disable your vehicle's ignition if it isn't started with the correct PIN code which you can create yourself. The immobiliser ghost can be set to Service/Valet Mode for when you require your vehicle to be cleaned or valet parking.